Governor Mixing - FUTABA T18MZ WC Instruction Manual

This is used to switch the RPM of the helicopters
head. Up to 3 rates can be set for each condition.
*The governor is used by connecting the governor speed setting
channel to governor function.
*When using an independent governor [ON]/[OFF] switch,
connect the AUX([ON]/[OFF]) connector of the governor to
Governor2 and set the switch to Governor2 at the Function
menu of the Linkage Menu.
Setting method
*When using the Fuel Mixture function, the mixture servo is
controlled from the governor. When transmitting the mixture
curve data from the transmitter to the governor, the governor
AUX (m.trm) connector must be connected to Governor2
function and governor side setting performed. See the
governor instruction manual.
Note: Always set (Act) and (Trim) to [NULL] for
[Governor] and [Governor 2] of the Function
menu.
The subtrim of [Governor] is made 0%.
Make the reverse direction normal.
＜ Model Menu (Helicopter Functions) ＞
165