When Using Two Or More The Same Kind Of Sensors; Sensor Unit Registration; Sensor Unit Reallocation - FUTABA T18MZ WC Instruction Manual

Next explanation is required when using two or more the same kind of sensors.
【Example 1 Altitude sensor × 1, Temperature sensor × 1】
A setup is unnecessary. Two sensors are packed by HUB and it connects with S.BUS2 of a receiver.
【Example 2 Altitude sensor × 1, Temperature sensor × 2】
It is unnecessary to set up one altitude sensor and one temperature sensor. Sensor registration is required for
two temperature sensors.

Sensor unit registration

The sensor unit of each transmitter slot is registered and the slot
number of each sensor unit is changed automatically.
"The registering succeeded."
"There are not enough available slots"
"The connected sensor is not ready"

Sensor unit reallocation

This function is used to reallocate slots to ensure that all sensors are
registered and operate as desired. As noted above, some sensors
require adjoining, or continuous, slots in order to register properly.
Examples of such sensors include but are not limited to, altimeters
and GPS units.
"All sensors are relocated successfully"
"Some sensors of the registered sensors cannot be found."
106
＜ Linkage Menu ＞
T18MZ
Hub
or Y-adapter
Receiver battery
T18MZ
Hub
Hub Hub
Receiver battery
(3.7-7.4V)