This mixing is used to correct changes (elevator
direction) generated when the camber aps (speed
aps) are used.
rates at - to + (negative to positive).
the Model Menu to call the setup screen
*The display screen is an example. The actual
screen depends on the model type.
and adjust the mixing rate with the adjustment
*When the mixing direction is reversed due to
changing the rate value from + to - (positive to
negative).
136
< Model Menu (Airplane/Glider Functions) >
FLP 1
(Camber Flap)
ELEVATOR
ELEVATOR 2
conditions (when conditions are set).
FLP 2
(Camber Flap)
adjustment