Throttle cut provides an easy way to stop the engine,
by flipping a switch with the throttle stick at idle.
The action is not functional at high throttle to avoid
accidental dead sticks. The switch's location and
direction must be chosen, as it defaults to NULL.
Note: When conditions are set, at Throttle cut setup can
be performed for each condition. Throttle cut can only be
activated in a speci c condition if you have selected and set
up this function within the condition. When using throttle cut
in a specific condition, and ON or active. If you change to
another condition, throttle cut is canceled and no longer active
in the rst condition, as long as the second condition does not
have throttle cut active.
Throttle cut setting procedure
Idle
Cut
Switch
Cut
< Linkage Menu >
87