Voltage Display - FUTABA T18MZ WC Instruction Manual

Voltage Display

The SBS-01V has the capability of measuring
voltage from two different batteries at the same
time. It will measure the voltage that its normal
3-pin connector is plugged into, such as a receiver
or servo battery pack
external lead that can be used to measure high
voltages like drive batteries.
Drive battery 1
（EXT Battery)
Drive battery 2
（EXT Battery)
Receiver battery
Two drive batteries and power supplies for servos are measured (SBS-01V use)
Drive battery 1
（EXT Battery)
Drive battery 2
（EXT Battery)
Power supplies
for servos
S.BUS2
servos
102
＜ Linkage Menu ＞
additionally, it has an
＜ Two examples of wiring are shown ＞
Two drive batteries are measured (SBS-01V use)
EXT Line
●Battery voltage measurement for receivers [R7008SB use]
●Battery voltage measurement for receivers [SBS-01V use]
●The drive battery 1 is measured in an EXT port [R7008SB use]
●The drive battery 2 is measured in an EXT line [SBS-01V use]
*SBS-01V measures two voltage. One corresponds to high voltages, such as a drive battery,
with an EXT line. Another is a normal line and is measurement of the battery for receivers of a
line connected to 3P connector, or the battery for servos.
EXT Line
●Battery voltage measurement for receivers [R7008SB use]
●The drive battery 1 is measured in an EXT port [R7008SB use]
●The drive battery 2 is measured in an EXT line [SBS-01V use]
●The voltage for servos is measured in a power supply line [SBS-01V use]
SBS-01V
Normal Line
Normal Line
Receiver battery
*The same
receiver battery