GPS Display
Futaba's GPS sensor (SBS-01G) obtains position
data from GPS, and displays the speed calculated
from the distance, and distance from a preset
position.
Additionally the sensor includes an accurate
atmospheric pressure sensor that provides altitude
and variometer (vertical speed) data.
↔
Surface
Altitude
SBS-01G
*Positioning time of GPS
When powered up, the SBS-01G begins to
acquire GPS satellite data. This process can
take several minutes. Please do not move the
model during this process. During acquisition,
the LED on the SBS-01G will blink green
after the satellites signals have been acquired,
the LED will become solid green, and the GPS
signal strength display on the transmitter will
show three bars.
Moving the model before the satellites are fully
acquired will cause a delay in acquiring the
satellite signal.
< Linkage Menu >
→
→
101