This function is used when you want to mix
the ailerons with rudder operation. It is used
when rudder is applied during roll maneuvers,
knife edge, etc. of stunt planes. It can be used to
bank scale models, large models, etc. like a full
size plane.
using the memory function. This is convenient when
setting a mixing curve. When memory operation
(switch operation) is performed in memory mode
with the rudder correction, the switch operation
memory items are displayed.
conditions. (When conditions are set)
132
< Model Menu (Airplane/Glider Functions) >
position at that time is displayed on the mixing
curve. When the memory mode is exited, the
the curve. (When the memory function is used,
AIL1
RUDDER
AIL 2
adjustment