Input Configuration - Barco CLM HD8 User Manual

8. Input menu
C
AUTION
jector.
8.2.2 Input configuration
How to change?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Input and press ENTER.
The Input menu is displayed.
3. Use the ▲ or ▼ key to select Slot module type and press ENTER.
The slot overview window is displayed with the actual situation filled out.
4. Use the ▲ or ▼ key to select a slot.
Press ENTER to open the Slot module type configuration window. This window is different for each module type.
5. Use the ▲ or ▼ key to select desired mode for the selected slot.
Image 8-1
Image 8-4
Possible results.
Input Indication
module
5 cable RGB AUTO
YUV AUTO
CVS/S-VIDEO AUTO
RGB HS/VS - CS
60
:
Always install a cover plate on an unused input slot. This to prevent dust intrusion into the pro-
Image 8-2
Description
RGB input. Projector searches for the sync signal and projects the correct image.
YUV input. Projector searches for the sync signal and projects the correct image.
Video or S-Video input. Projector detects automatically which type of video is
connected to the inputs.
RGB input with separate horizontal and vertical sync or separate composite sync.
Image 8-3
R59770057 CLM HD8 14/01/2009