Barco OVERVIEW CDG67-DL Installation Manual
  1. Manuals
  2. Brands
  3. Barco Manuals
  4. Projector
  5. OverView cDG67-DL
  6. Installation manual
Barco OVERVIEW CDG67-DL Installation Manual

Barco OVERVIEW CDG67-DL Installation Manual

Hide thumbs Also See for OVERVIEW CDG67-DL:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Installation manual
O
V
DG67-DL
VER
IEW C
R5976624

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OVERVIEW CDG67-DL and is the answer not in the manual?

Questions and answers

Related Manuals for Barco OVERVIEW CDG67-DL

Summary of Contents for Barco OVERVIEW CDG67-DL

  • Page 1 Installation manual DG67-DL IEW C R5976624...
  • Page 2 Passages of the corresponding chapter were added; see modification bars. Document History Modifications, which result in a new version, are indicated by a vertical bar. _________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...
  • Page 3 BARCO. If the purchaser or a third party carries out modifications or repairs on good delivered by BARCO, or if the goods are handled incorrectly, in particular if the systems are commissioned or operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid.
  • Page 4 An der Rossweid 5, D-76229 Karlsruhe Phone: +49-721-6201-0, Fax: +49-721-6201-298 E-mail: docu.de.bcd@barco.com, Web: www.barcocontrolrooms.com From: Date: Please correct the following points in this documentation (R5976624): page wrong correct __________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 5: Table Of Contents

    3.6 Grounding the structure and fixation of the structure to the floor ............3-15 3.7 Installing the engine ..........................3-18 3.8 Cabling of the engine..........................3-21 _________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...
  • Page 6 6.5.2 Lamp Optimization ..........................6-4 6.6 Access to the service menu ........................6-6 6.6.1 Projector Address..........................6-7 6.6.2 RS232 baudrate ..........................6-9 6.6.3 Internal patterns ..........................6-10 6.6.4 Color/Brightness..........................6-12 _________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...
  • Page 7 7.4 Indication of Power LED ..........................7-4 7.5 Indication of Lamp Door LED ........................7-4 7.6 Indication of the Status LEDs........................7-5 8 Hot Line .............................. 8-1 8.1 Address ................................8-1 ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 viii...

  • Page 8: Introduction

    Introduction Introduction 1 Introduction This chapter explains the used typographic styles and symbols. Safety information is provided concerning the operation of control room solutions from BARCO. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 9: Styles And Symbols

    The sheet icon indicates additional notes. Next to this icon you find further information. This arrow marks tips. Next to this icon you find important notes. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 10: Safety Instruction

    • All instructions for operating and use of this equipment must be followed precisely. 1.2.3 Installation Installation and preliminary adjustments should be performed by qualified BARCO personnel or authorized BARCO service dealers. 1.2.3.1 Power Connection This product should be operated from an AC power source. Power input is auto ranging from 100V to 240V.

  • Page 11: Placement

    Keep flammable and combustible materials away from the device at all time. In the event of fire, use sand, CO2, or dry powder fire extinguishers; never use water on an electrical fire. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 12: Servicing

    1.2.7 Unpacking of devices Note advises on the packaging for unpacking! 1.2.8 Modification of devices Mechanical or electrical modifications must not be made to the devices. BARCO is not liable for damages resulting from modified devices. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 13: Cleaning Instructions Screens And Mirrors

    Do not use the following cleaning cleaning agents, since these can scratch or detoriate the screen surface: Window cleaning sprays, kitchen scouring compounds, sovlents such as acetone, gasoline, benzene, alcohol, carbon tetrachloride or lacquer thinner. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 14: Pre-Installation Requirements

    The purchaser bears the responsibility for any damage or degeneration during this operation. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 15: Floor Requirements

    Bright colors for the ceiling, the walls and floor surrounding the screen have to be avoided. Do not use reflecting materials for the ceiling, the walls and floor surrounding the screen. Sufficient lighting in the projection-room is required during installation. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 16: Access

    This footprint can be used to help you set out the wall configuration the room where the wall will be installed. The circles at the side of the screen front are the rotation points for curved structures. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 17: Overall Dimensions

    OverView cDG67-DL units. The functional depth of the OverView cDG67-DL is 814 mm, the total depth is 954 mm. The standard screen height with adjustable feet is 1287.5mm. Other heights are available on request with a minimum of 622mm.

  • Page 18: Maintenance Area

    2. Pre-Installation requirements 2.9 Maintenance area A maintenance area of about 700mm must be provided behind each OverView cDG67-DL unit over the complete width. This area must be permanently accessible. The exact regulations for such a maintenance area can be obtained from the specifications for working premises.

  • Page 19: Built-In Configuration

    2.10 Built-in configuration When the OverView cDG67-DL is integrated in a wall, mind the following recommendations: Leave a gap of 100mm around the screen. Make sure to take the distance from the lower screen edge to the floor into account (standard 1287.5mm)

  • Page 20: Mechanical Setup

    3 Mechanical setup 3.1 Tools needed for installation • 1 set of screwdrivers • 1 tape measure (10m) • 1 tape measure (2m) • 1 water level • cord 50m • 1 pencil • 1 stanley knife All connections between plain metal (e.g. corner brackets) and the profiles have to be made with nippled hammer bolts ("long"...

  • Page 21: Preassemblies

    Notice that according to the drawing the inside thread is pointing downwards. Use jig JP01 (45mm) and jig JP02 (456.7 mm) to place the brackets. PA02 ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...
  • Page 22 When attaching the KaKu-brackets, pay special attention to the orientation of the 60/30 profile (r840378). Use B362667 (M8x10) to connect r840381 and r840383 to r840378, be sure to tighten the screws. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...
  • Page 23 3. Mechanical setup PA05 Use jig JP01 to place the brackets (45mm) PA06L/PA06R When assembling PA06, notice that there is a right and a left assembly! ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 24: Assembling The Structure

    Make sure to use nippled hammer bolts to Make sure to use nippled hammer bolts to fix the connection brackets! fix the connection brackets! fix the connection brackets! fix the connection brackets! ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...
  • Page 25 PA06 and PA04 onto PA09. Don’t forget to place the connection brackets. Notice that in case of a curved structure the front connection bracket is placed with JP03! ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...
  • Page 26 PA06 and PA04 onto PA09. Don’t forget to place the connection brackets. Notice that in case of a curved structure the front connection bracket is placed with JP03. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 27: Stitching The Screens

    R840065 on to the structure; make sure to align them to the vertical screen profiles with the arrow pointing to the floor. Hook vertical stitch plate R840066 in to the slots of R840065. SCR02 Detailed view: stitch borders ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...
  • Page 28 ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...
  • Page 29 Notice that only the black plastic horizontal stitch borders are constant in each wall-configuration, the vertical stitch borders are defined by the configuration as demonstrated in the figure above. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 3-10...

  • Page 30: Installing The Mirrors

    Hook the mirror into the upper slots of the front mirror brackets, and mount the mirror adjustment assembly on the rear plate with two M6x16 (B3631669) ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 3-11...
  • Page 31 Use the mirror jig to place the mirror in its nominal angular position by means of the mirror-adjustment bracket. Don’t forget to put all mirror adjustment-brackets into zero position ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 3-12...
  • Page 32 ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 3-13...
  • Page 33 Of course the two power strips may not be connected in series! Always take care that the max. rating of the power strip is not exceeded! mains voltage: mains voltage: 220V 110V ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 3-14...

  • Page 34: Grounding The Structure And Fixation Of The Structure To The Floor

    13cm measured from the floor. Make sure to tighten it fast to provide proper grounding! • Attach the grounding label about 20mm above the connection point. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 3-15...
  • Page 35 (see pictures above, second row). If the structure does not comply with these rules, there is no proper grounding!! ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 3-16...
  • Page 36 The design of connection and its implementation is part of the project management and customized for each installation. Please contact responsible project manager! ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 3-17...

  • Page 37: Installing The Engine

    30/60 profile. Then shift the IU towards the PU (position point) and tighten all screws. In this stage you have to lock the position of the 30/30 profile. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 3-18...
  • Page 38 Proceed with aligning the fan module with the engine shielding and tighten the screws (M6x7) ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 3-19...
  • Page 39 3. Mechanical setup ENG05 For final adjustment of the projection unit you need to remove the engine shielding. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 3-20...

  • Page 40: Cabling Of The Engine

    3. Mechanical setup 3.8 Cabling of the engine CBL01 Look at the above general connection diagram to connect all cables and air tubes. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 3-21...

  • Page 41: Taking Into Operation

    "tubes" slide on the guide rods [2]. OP04 Mind the position of the fingers: the force is to apply on the outer part of the module ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 4-22...
  • Page 42 Optimization has to be performed once for both lamps, cf. Lamp Lamp Lamp Lamp Optimization Optimization Optimization Optimization. It is recommended to do these step as soon as possible. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 4-23...

  • Page 43: Selecting The Correct Lamp Driver

    The following table lists the article number of the illumination unit and the required lamp driver: R764226 Compact R764581 Powerpack 100W R764582 Powerpack 120W For 80", the illumination unit with 200W (Osram Lamp driver) ist NOT an option!! ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 4-24...

  • Page 44: Geometric Adjustment

    5 Geometric adjustment SXGA+ and XGA use different lenses! 5.1 Adjustment Overview ADJ01 After setting up the system, optical adjustment must be done. In the following chapter a description of the adjustment principles is given as well as some hints to carry out this procedure.
  • Page 45 (don't tighten this ring too strong). Tighten carefully the four securing screws of the lenses. Check if the position of the picture did not change while locking the DLP engine. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 46: The Projection Lens For Sxga+ Systems

    1.5mm to remove the paint from the screws, loosen the screws, and turn the lens until its adjusted to 80" (84") SXGA+ (red scale), see picture below. Then tighten the screws again. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 47: The Projection Lens For Xga Systems

    Even if locked, the focus adjustment ring can be slightly turned. Do not worry! The focus is locked anyway! ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 48: Strictly Prohibited Devices

    For better recognition, these screws are locked with paint. The following picture shows the respective screws in detail: Figure 5-4 Never touch these screws! Screws Function 1, 2 (and 3, not visible) Scheimpflug adjustment 4, 5, 6 Mounting and fixation screws ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 49: Adjustment Devices

    H1, H2 Horizontal tapezoid B Lens securing screws V1, V2 Vertical trapezoid C Horizontal lens shift E Mounting angle D Vertical lens shift F Rotation Table 1 ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 50: First Steps

    Without unlocking the system, no adjustment is possible! 5.7 Focus adjustment The sharpness of the outlines of the squares (test pattern) is adjusted by turning the focus adjustment ring. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 51: Picture Size

    Turn the zoom adjustment ring at the lens ( Figure 5-1 ) clockwise to increase the size of the picture. Figure 5-10 Rear view picture size o.k. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 52: Vertical Trapezoid

    Rear view vertical trapezoid Turn the adjustment screw V1 clockwise (Figure 5-5 ) and V2 counterclockwise until the vertical lines gets parallel to the border of the screen. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 53: Horizontal Trapezoid

    Turn the adjustment screw H1 clockwise ( Figure 5-5 ) and H2 counterclockwise until the vertical lines gets parallel to the border of the screen. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 5-10...

  • Page 54: Rotation

    Figure 5-16 Rear view rotation Turn the rotation adjustment screw (Figure 5-6) [F] counterclockwise until the horizontal lines gets parallel to the border of the screen. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 5-11...

  • Page 55: Horizontal Picture Shift

    Use the adjustment screws for horizontal lens shift Figure 5-5 [C]. Loosen the left and tighten the right screw to move the picture to the right. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 5-12...

  • Page 56: Vertical Picture Shift

    • Tighten carefully the four securing screws of the lens. • Check if the position of the picture didn’t change while locking the projection unit. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 5-13...

  • Page 57: Installing The Shielding

    Finish by placing the profile caps and the nut caps. Complete the mirror shielding by attaching the Barco label on the respective rectangle (125mmx125mm) on the plastic mirror cover. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...
  • Page 58 SLD04 For all curved setups a small sheet metal strip is foreseen for the front, this part is mounted by means of double-sided tape. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 59: Installing The Standard And Design Trim

    Assemble the vertical trim by clicking it on to the structure by means of the ID-fix. Finish the trim by mounting the finishing corners. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...
  • Page 60 Velcro fastening tape. To attach the design trim proceed as follows: Arrange the required parts, pre-assemble the trim profiles by means of the brackets. Then push the design trim firmly onto the standard-trim. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 61: Final Adjustment And Configuration

    When using optical(fibre) data cables, please note that they may not be bent to a curvature with a bend radius less than 11cm! 6.2 The IR Remote-Control Unit Figure 6-1 IR Remote Control Unit (RCU) ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 62: Terminology Of Rcu Controls

    RC operating lights up when a button on the remote control is pressed. (This is a visual indicator indication to check the operation of the remote control) ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 63: General

    After insertion of a new the lamp, its serial number has to be entered. The command Reset runtime displays the dialog to enter the serial number. Figure 6-3 Reset runtime ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 64: Lamp Optimization

    The procedure should be performed subsequently for both lamps. The optimized positions are stored independently for both lamps, so that after setting the lamp lift in motion and thus changing the active lamp, the mirror position is adjusted accordingly. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...
  • Page 65 Lamp optimization in progress The procedure should be performed subsequently for both lamps. All other steps to configure the system have to be done in the service menu. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 66: Access To The Service Menu

    The Service menu entry is shown. Move the cursor to highlight Service. Press Enter to select. The following menu items are displayed: Figure 6-9 Service Menu ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 67: Projector Address

    CAST, Display Wall seen from front, A: top row To modify the projector address: • Move the cursor to Projector Address. • Press Enter to select. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...
  • Page 68 If the address is not entered within 5 seconds, the RCU returns to its default address (zero address) and control all projectors in the room. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 69: Rs232 Baudrate

    Standard baud rate which is supported by wall management software is still 9600! However, projectors with Firmware 3.x might be operated with the OverView Control Manager at 115200. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 70: Internal Patterns

    Pixel On/Off to check electronics and projection lens performance Lens Adjustment to check the projection lens adjustment arbitrary colors, explanation see below ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-10...
  • Page 71 The relationship to 8-bit input DVI RGB-Data is given by: ∗ − ∗ − ∗ − intern extern example 1019 intern extern • ASIC: application specific integrated circuit ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-11...

  • Page 72: Color/Brightness

    This menu provides some essential information for the ASIC: the factory colors of the DLP engine and the desired target colors. The color locations for DLP are indicated in coordinates of the x, y color space (CIE 1931). ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-12...
  • Page 73 (R, G, B, C, M, Y, W: "7 primary colors processing") On the Color Coordinate Adjustment dialog this information is related to Desired (CAST provides this information by determining the Target) ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-13...
  • Page 74 Gain should be set to 1 to prevent clipping! Colour Green Blue Cyan Yellow Magenta White Value of coordinate in the x, y chromaticity diagram, CIE 1931 Value ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-14...
  • Page 75 In case the white segment and spoke light recapture are activated, the white output is boosted. The White Peaking Factor is defined as the relation of "all whites" to the RGB-White: ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-15...
  • Page 76 The color correction model is only valid for one White Peaking Value setting! The White Peaking Value has also impacts on the gamma valu, cf. Degamma ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-16...
  • Page 77 Due to the White Peaking, for white and gray (R=G=B) even a gamma value of “1” (disabled) results in a non-linear effective gamma curve and thus in a non-linear response. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-17...
  • Page 78 Please note that this effect only applies for white and gray (R=G=B). The primary colors and secondary colors are not affected, for those the set gamma value is exactly the effective gamma value. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-18...
  • Page 79 In this operation mode, the entries of the Brightness menu are grayed out, since these refer to absolute values! Figure 6-24 Brightness menu entries are grayed out ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-19...
  • Page 80 If the dimmer fails to reach the target brightness because it is operated at it’s upper or lower limits an error message will show up. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-20...
  • Page 81 Figure 6-28 Dimmer Wheel, variable slit The amount of light emitted into the projection unit depends on the position (i.e. slit width) of the dimmer wheel. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-21...
  • Page 82 Figure 6-30 Dialog Box to enable/disable the optical dimmer The correct setting is Enabled! Disabled should only be selected in case the dimmer is defective (stuck)! ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-22...
  • Page 83 Only the settings for the active lamp can be modified. The active lamp is indicated in the caption of the settings dialog. The values are stored for both lamps individually. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-23...
  • Page 84 The DIS Calibration Factor can only be changed for the active lamp! The DIS Calibration Factor can be changed between 1.000 and 9.999 The DIS Calibration Factor is set for both lamps individually. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-24...
  • Page 85 Make sure that Absolute is enabled Read the DIS value. Now the DIS Calibration Factor can be calculated: Brightness Luxmeter DIS Calibr ation Fact Brightness DIS Value ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-25...

  • Page 86: Orientation

    Press Enter to select. The possible orientations are displayed. The actual orientation is indicated by a white dot: For OverView D series, the only correct orientation is Front/Ceiling! ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-26...

  • Page 87: Maintenance

    ) /decreases ( ) the values per 10. Clicking on the right most / left most arrow sets the value to the maximum or minimum (0). ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-27...
  • Page 88 Figure 6-38 select the device to restore its default production settings. • Move the cursor key to highlight the desired device. • Press Enter to select. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-28...
  • Page 89 6.6.6.3 Program Inputboard Figure 6-40 Servic|Maintenance|Porgram Input Board Use this command to program the input board. This procedure is recommended e.g. when replacing the Pico2+ board! ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-29...
  • Page 90 Figure 6-41 Service|Maintenance|Restart Projector Selecting this comand requires confirmation due to the risk of data loss: Figure 6-42 warning about the loss of the user settings ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-30...
  • Page 91 Selecting this command opens a dialog to select the correct lamp driver. Default setting (factory setting) is PowerPack 120W. This selection has to be adjusted according the actual lamp driver employed in the system. Figure 6-44 select the correct lamp driver ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-31...

  • Page 92: No Source Counter

    A dialog opens which shows the actual value: igure 6-46 No Source Counter to check how often the signals has been lost ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-32...

  • Page 93: I2C Diagnostics

    This command displays the I2C Diagnositc table of the devices, including their addres and their status. Consult this table in case an error occurs!: igure 6-48 I2C Diagnostics information ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-33...

  • Page 94: Dimmer Sensor Power

    6-49 Service|Maintenance|Dimmer Sensor Power Disable Dimmer Sensor Power only on special request/special advise. igure 6-50 enable/disable the dimmer sensor power ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-34...

  • Page 95: Save

    6-52 enable/diasbale Auto Save When the projector is switched to standby, it will store all data. No extra "Save now" command has to be given. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-35...

  • Page 96: Freeze

    Thus dithering properties which are introduced earlier in the processing chain cannot be observed dynamically. Also the dithering noise is frozen in that case. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-36...

  • Page 97: Disable Ir

    10 seconds. After this time the IR will be available again. Press the On/Reset button for about 10 seconds to enable the IR remote control again! ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-37...

  • Page 98: Lamps

    Clear Lamp History will erase all former data of all lamps ever used with the system. Be carefully when selecting this command! igure 6-56 confirmation dialog ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-38...
  • Page 99 Make sure to select the correct lamp driver! Otherwise the displayed values are invalid! Figure 6-58 Service|Lamps|Read Lamp Voltage ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-39...
  • Page 100 Lamp Runtime Warning set to 6000 hours After the specified runtime time a warning message will appear on the screen. Figure 6-61 Lamp Runtime Warning ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-40...
  • Page 101 Write Lamp Runtime as mentioned above. Figure 6-62 Enter serial number (after lamp exhange) Use these commands when exchanging lamps within a Display Wall. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-41...

  • Page 102: Version

    6. Final Adjustment and Configuration 6.6.14 Version Figure 6-63 Service menu: Version Select this command to see the release status of different modules of the firmware. Figure 6-64 Service|Version ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-42...

  • Page 103: More

    Contact Bernard Geitz to receive the projector-specific Authorization Code bernhard.geitz@barco.com; (email: phone +49 721 6201 110) • Use the numeric keys of the IR Remote-Control unit to enter the Authorization Code. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-43...
  • Page 104 Hot Standby functionality In case Hot Standby is enabled, it is mandatory to inform Project Management. Hot Standby requires special actions, e.g. with service contracts. ______________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005 6-44...

  • Page 105: Manual User Interface

    [B], [C], the LED’s of the illumination unit, and the LED’s of the lamp doors. The manual user interface is intended to operate the projection module when servicing. The trained Barco support technicians can analyze errors by evaluating the status of the LEDs.

  • Page 106: Standby Switch

    3sec switching off the projector (standby), reset of non critical error Projector is blinking yellow no function starting up or Down no function shutting down ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 107: Active Lamp Selection Switch

    (for servicing only) green, no function (error) blinking slowly down no function Projector is blinking yellow no function starting up or Down no function shutting down ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 108: Indication Of Power Led

    DON’T open the lamp door! (in case the door is opened, an error occurs) Only open the lamp door in case the lamp door LED shines red. ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 109: Indication Of The Status Leds

    Bottom LED Static Fans are off (status LED of Fan) Green Static Fans are on blinking slowly Fan error, at least one fan failed service required! ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

  • Page 110: Hot Line

    Feel free to contact us if you have any further questions! • BARCO N.V. Projection Systems - Europe Noordlaan 5, B-8520 Kuurne Phone: +32-56-368-211, Fax: +32-56-368-251 E-mail: support.bcd@barco.com, Web: www.barcocontrolrooms.com ________________________________________________________________ Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005...

Table of Contents