Input Source Connections - Barco CLM HD8 User Manual

Light
output %
100
90
70
Image 5-3
5.2

Input source connections

General
The input and communication unit is equipped with two input slots, which accept any type of input designed for the CLM projector.
The modularity of the input modules makes the CLM projector very flexible regarding input source connectivity. Note that the slot
numbering is done from top to bottom. So, the uppermost slot is slot number "1", the second is slot number "2". All input modules
have two status LED's. The green LED lights up if the input module is selected as the active input module. The yellow LED lights
up if the input module has detected valid input syncs.
1
2
Image 5-4
C
AUTION
jector.
Available input modules
Image 5-5
5 Cable input (Multi purpose) (R9854430).
R59770057 CLM HD8 14/01/2009
max. 3 lamps on
170
110 140
100
:
Always install a cover plate on an unused input slot. This to prevent dust intrusion into the pro-
Image 5-6
HDSDI - SDI input (R9854450).
4 lamps on
Input
264
voltage V
Image 5-7
DVI input (R9854460).
5. Connections
G
Y
37