Start Up Of The Adjustment Mode; About The Adjustment Mode; About The Use Of The Remote Control And The Local Keypad; Start Up The Adjustment Mode - Barco CLM HD8 User Manual
Hide thumbs
Also See for CLM HD8:
- User manual (213 pages) ,
- Brochure & specs (4 pages) ,
- Supplementary manual (1 page)
Table of Contents
Advertisement
7. START UP OF THE ADJUSTMENT MODE
Overview
•
About the adjustment mode
•
About the use of the remote control and the local keypad
•
Start up the adjustment mode
•
Navigation and adjustments
•
On screen menus versus LCD display menus
7.1
About the adjustment mode
Overview
As the adjustment mode is the central place to control and align the projector, the following functions can be done:
•
Input setup: the different inputs can be configured for a specific format or input source.
•
Image adjustment: these adjustments are organized per image source and contain the aspect ratio, timings and image settings.
•
Layout adjustment: set up of the main window and the picture in picture window.
•
Lamp: manage the lamp mode, the lamp use, lamp type and history
•
Alignment: groups all controls necessary during the setup of the projector onto a screen.
•
Projector control: contains the accessibility settings of the projector, such as address and communication setup.
•
Service: contains information about how the projector is performing. This information will be useful when calling for a service
intervention.
7.2
About the use of the remote control and the local keypad
Overview
All navigations and adjustments can be done either with the remote control or with the local keypad.
Almost all the keys on the remote control have an equivalent on the local keypad.
Exceptions:
•
▲ on the remote control corresponds with the up + key on the local keypad.
•
▼ on the remote control corresponds with the down - key on the local keypad.
•
◄ on the remote control corresponds with the left - key on the local keypad
•
► on the remote control corresponds with the right + key on the local keypad
7.3
Start up the adjustment mode
Start up tools
To start up the adjustment mode, use the remote control or the local keypad.
How to start up?
1. Press Menu on the remote control (RCU) or on the local keypad to start up the Adjustment mode.
R59770057 CLM HD8 14/01/2009
7. Start up of the adjustment mode
55
Advertisement
Table of Contents
