Barco CLM HD8 User Manual page 164
Hide thumbs
Also See for CLM HD8:
- User manual (213 pages) ,
- Brochure & specs (4 pages) ,
- Supplementary manual (1 page)
Table of Contents
Advertisement
15. Maintenance
To avoid this problem, we strongly advise to check at least every 3 months the cooling level in the cooling reservoir of the projector.
W
ARNING
How to check
Remove :
-
lamp door, see "Removal of the lamp door", page 174.
-
front cover, see "Removal of the front cover", page 173.
-
back cover, see "Removal of the back cover", page 175.
-
top cover, see "Removal of the top cover", page 176.
-
side cover, see "Removal of the side cover", page 176.
1. Check the cooling liquid level.
When the white indication line is in the service area, then the reservoir has to be topped-up again. To top-up the reservoir, see
chapter "16. Servicing", "Top-up the reservoir with cooling liquid", page 169.
When the white indication is in the good area, no corrective action should be taken. Close the top cover and fasten both captive
screws.
Image 15-1
Check cooling liquid
160
:
Switch off the projector and pull out the power cord before starting the check procedure !
R59770057 CLM HD8 14/01/2009
Advertisement
Table of Contents
