Blanking - Barco CLM HD8 User Manual
Hide thumbs
Also See for CLM HD8:
- User manual (213 pages) ,
- Brochure & specs (4 pages) ,
- Supplementary manual (1 page)
Table of Contents
Advertisement
12.5 Blanking
What can be done ?
Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and
to hide or black out unwanted information (or noise). A '0' on the bar scale indicates no blanking.
Which blanking adjustments are available ?
•
top blanking
•
bottom blanking
•
left blanking
•
right blanking
Image 12-15
Blanking
A
Top blanking
B
Bottom blanking
C
Left blanking
D
Right blanking
The reset function brings all blanking settings back to zero.
How to adjust the blanking?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Alignment and press ENTER.
3. Use the ▲ or ▼ key to select Blanking and press ENTER.
4. Use the ▲ or ▼ key to select the desired blanking adjustment and press ENTER.
5. Use the ▲ or ▼ key to adjust until the desired blanking is reached.
6. Press EXIT to return.
R59770057 CLM HD8 14/01/2009
12. Alignment menu
117
Advertisement
Table of Contents
