Lamp Mode - Barco CLM HD8 User Manual

11. Lamp menu
The status and the run time for each lamp are displayed.
Image 11-11

11.6 Lamp mode

What can be done?
The projector is equipped with 4 identical lamps. Depending on the main voltage, the lamp selection mode menu will show 4 lamps,
3 lamps, 2 lamps or a single lamp when starting up the projector.
When the main input voltage is between:
• 90-140V : lamp mode selection between 3 lamps, 2 lamps and 1 lamp.
• 170-264V : lamp mode selection between 4 lamps, 2 lamps and 1 lamp.
In 3 lamps mode, the projector will always ignite lamp 3 and 4 and lamp 1 or 2 depending on the run time of lamp 1 or 2. It will
always use those with the lowest run time.
In 2 lamps mode, the projector will always ignite lamp 1 & 3 or 2 & 4 depending on the current run time. It will always use those with
the lowest run time.
In 1 lamp mode, the projector will always ignite lamp 3 or 4, depending on the current run time. It will always use the lamp with the
lowest run time.
How to change the lamp mode
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Lamp and press ENTER.
3. Use the ▲ or ▼ key to select Lamp mode and press ENTER.
The Lamp mode selection menu is displayed.
4. Use the ▲ or ▼ key to select the desired lamp mode and press ENTER.
Image 11-14
112
Image 11-12
Image 11-15
Image 11-13
Image 11-16
R59770057 CLM HD8 14/01/2009