Tint (Hue); Phase - Barco CLM HD8 User Manual
Hide thumbs
Also See for CLM HD8:
- User manual (213 pages) ,
- Brochure & specs (4 pages) ,
- Supplementary manual (1 page)
Table of Contents
Advertisement
9.3.4
Tint (hue)
About Tint
The Tint function is used to adjust color hue to obtain true color reproduction and is only active for Video and S-Video when the
NTSC color system is used. For PAL and SECAM sources, Tint is not accessible.
How to change the saturation?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Image and press ENTER.
3. Use the ▲ or ▼ key to select Image settings and press ENTER.
4. Use the ▲ or ▼ key to select Tint and press ENTER.
The Tint progress bar appears.
5. Use ◄ or ► to change the tint.
The higher the value, the higher the tint.
Image 9-15
Image 9-18
9.3.5
Phase
About Phase adjustment
When displaying computer patterns or graphics (RGB or YUV signals) which are very detailed (tilting, vertical stripes, etc. ), jitter
in picture (mis-sampling) may occur, causing horizontal stripes in portions of the screen. When this jitter occurs, adjust 'Phase' for
optimum image.
Image 9-19
Jittering on image
R59770057 CLM HD8 14/01/2009
Image 9-16
Image 9-17
9. Image menu
73
Advertisement
Table of Contents
