Dmx Mode; Buttons; Apa Button - Barco CLM HD8 User Manual

13. Projector control

13.6.3 DMX mode

What can be done ?
2 modes for DMX are available:
• Normal mode which has currently 10 channels implemented.
• Simple mode which has currently only 1 channel implemented.
Depending on the DMX application the correct mode has to be selected.
For the complete DMX chart, see "DMX Chart", page 187.
How to set the mode
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select DMX and press ENTER.
4. Use the ▲ or ▼ key to select DMX mode and press ENTER to toggle between [Normal] and [Simple].
Image 13-47

13.7 Buttons

Functionality
Some buttons on the RCU or local keypad can have a different functionality depending on the need of the projector owner.
Overview
•

APA button

• Shortcut keys
13.7.1 APA button
What can be done?
The function of the APA button can be configured according the wishes of the user.
The function can be:
• Auto align (only aligning of the preview window is executed).
• Auto-image menu. This function opens a auto image menu where the user can make his choice between auto align, auto
contrast/brightness and auto phase.
How to configure the Auto button?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select Buttons and press ENTER.
4. Use the ▲ or ▼ key to select APA and press ENTER to toggle between [Align only] and [Auto-image menu].
142
Image 13-48
Image 13-49
R59770057 CLM HD8 14/01/2009