Preparing The Projector - Barco CLM HD8 User Manual

Image F-4
Remove stacking point construction
F.3

Preparing the projector

C
AUTION
mounted.
What has to be done?
Before the carry handle can be mounted, the projector feet must be removed and an extra support point must be added.
Necessary tools
• 8 mm Allen wrench.
• 22 mm open-end wrench.
Necessary parts
Back support point.
How to handle?
1. Turn the projector upside down.
2. Remove the 3 feet. First unscrew the foot cap (reference 1) and than loosen the foot adapters (reference 3). Use a 4 mm Allen
wrench to unscrew the hexagon socket head cap screws (reference 2).
R59770057 CLM HD8 14/01/2009
:
Before turning the projector upside down, be sure the stacking points on the top cover are
F. Mounting optional Carry handle
203