Lamp Power Mode - Barco HDF W22 User And Installation Manual

11.2 Lamp power mode

What can be done?
The lamp power mode can be switched between Normal, Economic and Long Life. When playing in Economic and Long Life
mode, the lamp life time will be higher than in normal mode.
The counter of the lamp life time counts equal for normal or economic mode but the customer will see that the ageing of the lamp is
lower in economic and long life mode.
Normal : maximum allowed power is fed to the lamp. Maximum light output is reached in this way.
Economic : a reduced wattage is fed to the lamp. Reduced light output but a longer life time for the lamp.
Long Life : wattage fed to the lamp reduce to 75%. Reduced light output but a longer life time for the lamp.
The lamp power mode setting is linked with the CLO mode setting. When CLO mode settings is set to On, the lamp power mode
setting is ignored and projector will play in CLO mode. Once the CLO mode setting is switched to Off, the installed lamp power
mode setting will be used.
How to switch
1. Press Menu to activate the menus and select Lamp → Power → Mode.
Image 11-1
Main menu, lamp
Image 11-3
2. Press ENTER to toggle between [Normal], [Economic] and [Long Life].
R5905158 HDF SERIES 08/12/2016
Image 11-2
Lamp, power
11. Lamp
209