Rear Wheel Disassembly; Rear Wheel Assembly; Wheel Bearing Removal - Honda 2000 XR50R Service Manual

I
DISASSEMBLY
Remove the nuts, bolts and driven sprocket.
Remove the left dust seal.
Wheel bearing removal
Install the bearing rem over head into the bearing.
From the opposite side install the bearing remover
shaft and drive the bearing out of the wheel hub.
Remove the distance collar and drive out the other
bearing.
TOOLS:
Bearing rem oYer head, 12 mm 07746 - 0050300
(Equivalent
commercially avail-
Bearing remover shaft
ASSEMBLY
BEA.AINIG (S20lU)
able in U.S.A.)
07746 - 0050100
(Equivalent
commercially avail-
able in U.S.A.)
DISTANCE COLLAR
REAR WHEEL/BRAKE/SUSPENSION
BEARING (620 1U)
DRIVEN SPROCKET
BOLTS
13-5