Gearshift Linkage Removal - Honda 2000 XR50R Service Manual

CLUTCH/ GEARSHIFT LINKAGE
Install the clutch outer cover and tighten the screws
to the specified torque.
TORQUE: 5 N·m (0.5 kgf.m, 3.6Ibf·ft)
Install the clutch lifter cam plate.
Install the oil through spring and oil through.
Install the spri.ng, ball retainer and clutch lifter lever.
Install the right crankcase cover (page 9·17).
GEARSHIFT LINKAGE
REMOVAL
Remove the clutch and pri m ary dr iven gea r (page
9-4).
Clean the
Remove the bolt and gearshift peda l.
gearshift spindle
end to prevent dirt
from enltNing the
crankcase.
9-14
•
•
•
•
•
•