Honda 2000 XR50R Service Manual page 155

FRONT WHEEL/ BRAKE / SUSPENSION/ STEERING
Install the front wheel between the fork legs w h ile
aligning the brake panel groove with the boss on
the left fork tube.
Align
Apply a thin layer of grease to the front axle su rface.
Instal l the front axle from the right side.
Hold the axle and temporarily tighten the axle nut.
Install the spring and joint pin and connect the
brake cable.
Instal l the adjusting nut.
Adjust the front brake lever free play (page 3-14),
With the frol\t brake applied, pump the fork up and
down several times to seat the axle and check
brake operation.
n ghten the axle nut to the specified torque.
TORQUE: 47 N·m (4.8 kgf.m ,35 Ibf·tt)
Install the fork protector and tighten the bolts.
TORQUE: 10 N·m (1.0 kgf.m, 7 Ibf·tt)
InstaU the brake cable into the cable holder.
12-9