Rear Brake Removal; Rear Brake Inspection; Rear Brake Disassembly - Honda 2000 XR50R Service Manual

REAR WHEEL/BRAKE/SUSPENSION
Install the spring onto the brake rod and the joint
pin into the brake arm.
Connect the brake rod and install the adjusting nut.
Adjust the drive chain slack (page 3-12).
REAR BRAKE
REMOVAL
13-8
Remove the brake panel from the rear wheel (page
13-3),
INSPECTION
Measure the rear brake drum I.D.
SERVICE LIMIT:
80.5 mm (3.17 in)
Measure the br.ake lining thickness.
SERVICE LIMIT: 2.0
mm (0.08 in)
DISASSEMBLY
Remove the brake shoes and springs.
SPRING
JOINT PIN
ADJUSTING NUT
•
•
•
•