Honda 2000 XR50R Service Manual page 111

Install the drive gear outer and clutch center.
Install the following:
-Clutch plate A
-Free springs
-Clutch disc-A
-Clutch disc B
-Clutch disc A
-Clutch plate 8
NOTE:
• Install the clutch disc A with its flat surface facing
the clutch disc 8 .
• Install the clutch plate 8 with its chamfered side
f acing the clutch disc A.
Install the clutch set ring with its chamfered side
facing the clutch plate B.
CLUTCH/GEARSHIFT LINKAGE
DRIVE GEAR OUTER
-"10ISCB PLATE B
SET RING
9-11