Shock Absorber Removal - Honda 2000 XR50R Service Manual

REAR WHEEL/BRAKE/SUSPENSION
Apply oil to a new dust seal and install it onto the
brake panel.
Install the w ear indicator onto the brake cam by
aligning its wide tooth with the wide groove in the
brake cam.
Install the brake arm by aligning the punch marks
on the arm and brake cam.
Install a new brake arm pinch bolt and nut as
shown and tighten it to the specified torque.
TOROUE: 6 N·m (0.6 kgf.m, 4.3 Ibf·tt)
Install the brake arm cover onto the arm.
Apply grease ..to the anchor pin and brake cam
sl iding surfaces.
Assemble the brake shoes and spring as shown
and install them onto the brake panel.
Wipe any excess grease off the brake cam and
anchor pin.
INSTALLATION
Install the rear wheel (page 13-7).
SHOCK ABSORBER
REMOVAL
13-10
Support the motorcycle securely using a hoist or
equivalent and raise the rear wheel off the ground.
Remove the seat (page 2-2).
Remove the shock. absorber lower mounting nut
and bolt.