Front Wheel Removal - Honda 2000 XR50R Service Manual

FRONT WHEEL/BRAKE/SUSPENSION/STEERING
Secure the engine stop switch wire with the wire
bands properly.
Install the number plate over the steering stem nut
end insert the breather tube into the hole in the
number plate.
Check the
(page 3-4).
throttle grip operation and free play
FRONT WHEEL
REMOVAL
A contaminated brake drum or shOll rsducfls
stopping power. Discard contaminated shoss and
c/tlBn a contaminated drum with
8
high quality
brake degre.sing
89ftnt.
Support the motorcycle securely using a safety
stand or a hoist.
Remove the brake cable from the cable holder on
the f ork protector.
Remove the two bolts and fork protector.
Disconnect the brake cable from the brake arm.
Remove the axle nut, axle and front wheel.
Remove the side collar and the brake panel from
the wheel hub.
PROTECTOR
12-5