Honda 2000 XR50R Service Manual page 153

FRONT WHEEL/BRAKE/SUSPENSION/STEERING
Install the bearing remover head into the bearing.
From the opposite side, install the bearing remover
shah and drive the bearing out of the wheel hub.
Remove the distance collar and drive out the other
bearing.
TOOLS:
Bearing remover head, 12 mm 07746- 0050300
(Equivalent
commercially
Bearing remover shaft
ASSEMBLY
available in U.S.A)
07746 - 0050100
(Equivalent
commercially
available in U.s.A)
RIGHT WHEEL BEARING (6201U)
DUST SEAL
CAUTION :
Never Insta" the old bearings. Once th" bearings
have been
removed, the
bearings
must
be
replaced
with new ones.
Pack each wheel bearing cavities with grease.
Drive in a new left bearing squarely with its sealed
side facing out.
Install the distance collar and drive in a new right
bearing using the sama tools.
TOOLS:
Driver 07749 - 0010000
Attachment,32 x 35 mm 07746 - 0010100
Pilot, 12 mm 07746 - 0040200
DISTANCE COLLAR
LEFT WHEEL BEARING (6201U)
12-7