Clutch System; Side Stand; Suspension; Front Suspension Inspection - Honda 2000 XR50R Service Manual

MAINTENANCE
CLUTCH SYSTEM
If the clutch does not operate properly, adjust the
following:
loosen the clutch adjuster lock nut and turn the
adjusting bott one full turn counterclockwise.
Slowly turn the adjusting bolt clockwise until
resistance is felt.
Turn the adjusting bolt 1/8 turn counterclockwise
from this position, and tighten the lock nut while
holding the adjusting bolt.
TORQUE: 12 N·m (1.2 kgf.m, 9Ibf·ft)
Check that the clutch is not slipping and is properly
disengaging by operating gearshift pedal.
SIDE STAND
Support the motorcycle on a level surface.
Check the
sjd~
stand spring for damage or loss of
tension.
Check the side stand assembly for freedom of
movement and lubricate the side stand pivot if
necessary.
SUSPENSION
3-16
Loose, worn or damaged suspension parts impair
motorcycle stability and control. Repair
or
replace
any damaged components before riding. Riding a
motorcycle with faulty suspension increases your
risk of
an
accident and possible injury.
FRONT SUSPENSION INSPECTION
Check the action of the fork legs by operating the
front brake and compressing the front suspension
several times.
Check the entire assembly for signs of leaks,
damage or loose fasteners.
Replace damaged components which cannot be
repaired.
Tighten all nuts and bolts.
Aefer to section 12 for fork service.
•
•
SIDE STAND
SPRING
•