Inspection - Suzuki RM-z450 Owner's Service Manual

IMPELLER AND WATER PUMP SHAFT
• Hold the water pump shaft 1 with a wrench and remove the
impeller 2.
• Remove the washers (3, 4) and water pump shaft 5.
• Remove the oil seal.
Replace the removed oil seal with a new one.
NOTE:
If there is no abnormal condition, the oil seal removal is not nec-
essary.

INSPECTION

IMPELLER AND WATER PUMP SHAFT
• Inspect the impeller and water pump shaft for damage.
• If necessary, replace the defective parts with a new one.
OIL SEAL
• Visually inspect the oil seal for damage.
• If any defects are found, replace the oil seal with a new one.
CAUTION
COOLING SYSTEM 14-8