Suzuki RM-z450 Owner's Service Manual page 136

8-6 KICK STARTER
• Install the washer 8 and spring 9 onto the kick starter shaft.
• Install the kick starter shaft assembly onto the crankcase.
NOTE:
Securely engage the stopper portion C of the kick starter with
the stopper guide D.
• Hook the end of return spring to the crankcase.
• Install the kick starter idle gear 0.
• Reassemble the clutch component parts. (!7-9, -10)
• Install the dowel pins, gasket A and O-ring B.
Use the new gasket A and O-ring B to prevent oil
leakage.
• Install the right crankcase cover C.
Use the new gasket washer E to prevent oil leakage.
# Right crankcase cover bolt: 11 N·m (1.1kgf-m, 8.0 lb-ft)
CAUTION
CAUTION