17-17
FRONT AND REAR BRAKES
BRAKE LEVER
REMOVAL
• Remove the boot 1 and brake lever 2.
• Remove the brake lever adjuster return spring 3.
' 09930-11950: Torx wrench (T25)
INSTALLATION
Install the brake lever in the reverse order of removal. Pay atten-
tion to the following points:
• Apply grease to the brake lever adjuster return spring, pivot
bolt and contact point between piston and brake lever.
( 99000-25010: SUZUKI SUPER GREASE "A"
• Tighten the brake lever pivot bolt and lock-nut to the specified
torque.
# Brake lever pivot bolt 1: 6 N·m (0.6 kgf-m, 4.5 lb-ft)
Brake lever pivot bolt lock-nut 2:
or equivalent
6 N·m (0.6 kgf-m, 4.5 lb-ft)