Crankcase Installation - Suzuki RM-z450 Owner's Service Manual

10-15 TRANSMISSION AND CRANKSHAFT

CRANKCASE INSTALLATION

• Fit the dowel pins and gasket 1.
Replace the gasket 1 with a new one.
• Fit the right crankcase on the left crankcase.
• Install the clamp A to the bolt.
• Tighten the crankcase bolts to the specified torque.
' Crankcase bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
NOTE:
If it is hard to tighten the bolts, separate the crankcase and con-
firm that the transmission parts are assembled correctly.
• Install the oil strainer (No.1) and oil strainer cap 2. (!2-13)
• Inspect the crankshaft, countershaft and driveshaft for smooth
movement.
• Apply grease to the oil seal lip and O-rings 3.
Replace the O-rings with new ones.
$ 99000-25010: SUZUKI SUPER GREASE "A"
• Fit the O-rings 3 and spacer 4 to the driveshaft.
CAUTION
CAUTION
or equivalent