EN 4
2. Explanation of Symbols on the Machine
WARNING!
!
maintenance, symbols are carved in relief on
the machine.
According to these indications, please be
careful not to make any mistake.
The port to refuel "MIX GASO-
LINE"
Position: Fuel cap
The port to top up chain oil
Position: Oil cap
Setting the switch to the "I" posi-
tion, the engine starts.
Setting the switch to the "O" posi-
tion, the engine stops immediate-
ly.
Position: Rear-left of the unit
For safe operation and
2. Explanation of Symbols on the Machine
If you pull out the choke knob,
you can set the choke as a cold
start mode.
Position: Upper-right of the air-
cleaner cover
The screw under the "H" stamp is
The
High-speed
screw.
The screw under the "L" stamp is
The
Slow-speed
screw.
The screw at the left of the "T"
stamp is the Idle adjustment
screw.
Position: Left side of the rear
handle
adjustment
adjustment