Fuji Xerox DocuPrint CM415 AP User Manual page 74

2 Product Overview
 Send from Folder
You can operate files stored in a folder of the machine.
For more information, refer to "Send from Folder" (P.317).
 Stored Programming
You can operate stored programs.
Stored Programming is a service that allows you to store settings that you expect to use
frequently and call them with a single button operation.
For more information, refer to "Stored Programming" (P.339).
 Network Scanning (ApeosPort Series Models only)
You can scan documents after specifying a file (job template) saving scanning conditions,
information on the forwarding destination server, and others.
For more information, refer to "Network Scanning" (P.271).
 Store & Send Link
2
After you scan documents, the machine temporarily saves the scanned data and sends you
e-mail attached with two URLs: one is for the location to retrieve the scanned data, and the
other is for the location to delete the data.
For more information, refer to "Store & Send Link" (P.293).
Note
For information on how to display [Store & Send Link] on the Services Home screen, refer to "1 Before Using the Machine" >
"Customizing the Control Panel" in the Administrator Guide.
 Store to USB
You can scan documents and save the scanned data to a USB memory device.
For more information, refer to "Store to USB" (P.286).
Note
 Media Print - Text
You can print document files (PDF, TIFF, XML Paper Specification (XPS), XDW (XBD), and
JPG (JFIF)) after retrieving the files from a CompactFlash card or a USB memory device. You
can also print the scan data stored with the Store to USB service.
For more information, refer to "Media Print - Text" (P.366).
Note
 Media Print - Photos
You can print image data (DCF1.0) taken with a digital camera. You can retrieve the data
only from a CompactFlash card.
For more information, refer to "Media Print - Photos" (P.365).
Note
 Job Flow Sheets (ApeosPort Series Models only)
You can scan documents using a job flow sheet.
Job Flow Sheets is a service that allows you to set a flow of transfer settings for scanning
data to enable efficient routine transfer.
For more information, refer to "Job Flow Sheets" (P.333).
74
• This service appears on the screen when the Authentication feature is enabled.
• This service is not available for some models. An optional component is required. For more
information, contact our Customer Support Center.
• This service is not available for some models. An optional component is required. For more
information, contact our Customer Support Center.
• This service is not available for some models. An optional component is required. For more
information, contact our Customer Support Center.