Calling A Stored Program - Fuji Xerox DocuPrint CM415 AP User Manual

8 Stored Programming

Calling a Stored Program

The following describes how to call a stored program.
When you call a specified stored program, the last screen shown when you registered the
stored program appears.
1
Press the <Services Home> button.
2
Select [Stored Programming].
3
Select a number of a stored program
containing the features you want to use.
Note
8
For information on how to change the volume of the sound that notifies that a stored program has been called, refer to "5
Tools" > "Common Service Settings" > "Audio Tones" > "Stored Programming Complete Tone" in the Administrator Guide.
4
After the stored program is called, select other features if necessary.
5
Press the <Start> button.
346
• You can only select registered numbers.
• Select [ ] to return to the previous screen or
[ ] to move to the next screen.
• Scroll the list by drag or flick operation to
switch the screen to be displayed. For
information on how to drag or flick, refer to
"Touch Screen" (P.77).
• After the stored program has been called, the machine sounds an audible tone. If a failure occurs,
the machine sounds a fault tone.
Services Home
ABC DEF
1 2 3
Dial
Copy
Pause
GHI JKL MNO
4 5 6
Speed
(Not In Use)
PQRS TUV WXYZ Dial
7 8 9
Review
0
C
＃
<Services Home> button
Job Machine
Log In / Out Status Status
ABC DEF
2 3
Dial
Pause
JKL MNO
Clear All
5 6
Interrupt Stop
Speed
Dial
TUV WXYZ
Start
8 9
0 C
＃
Power Data Error
<Start> button
Job
Log In / Out Status
Clear All
Interrupt
Start
Power Da
Power
Saver