Fuji Xerox DocuPrint CM415 AP User Manual page 382

11 Job Status

An entire preview image is displayed.
In the entire view, the file name, Stored Date,
and Pages are displayed on the right side of the
preview area.
Double-tap the preview area to move to the
enlarged view.

A previewed image is enlarged or reduced.
In the enlarged view, the following operations
are available.



 Print Quantity
Specify the number of print sets.
 Output Color
Displays the output color of the document to be printed.
 2 Sided Printing
Displays 1 Sided, Flip on Short Edge, and Flip on Long Edge.
 Booklet Creation
Displays Left/Top Bind and Right/Bottom Bind.
11
Note
 Print
Prints the Delayed Print job. After printing, the job is deleted. If printed manually, the job
will not be printed at the specified time.
Refer to "When [Print] is Selected" (P.382).
When [Print] is Selected
1
Select [Yes].
Note
382
(Entire view)
(Enlarged view)
Drag or flick the enlarged image to move the
position to be displayed.
Double-tap the previewed image to change
the ratio of the image size.
Drag the slider to change the ratio of the
image size.
• This item is displayed when the booklet layout is set using a printer driver.
• When the orientation of booklet creation cannot be detected, "Booklet Creation" is displayed only.
• The screen as shown on the right does not
appear if [Print Job Confirmation Screen] is
set to [Disabled] in the System
Administration mode. If [Disabled] is
selected, the machine automatically deletes
the job after printing without displaying the