Preview (Previewing The Scanned Images During A Scan Job); Color Scanning (Selecting An Output Color) - Fuji Xerox DocuPrint CM415 AP User Manual

Preview (Previewing the Scanned Images during a Scan Job)

You can preview the scanned images while scanning the document.
1
Check [Preview].
2
The message screen on the right will be
displayed. Configure each settings and press
the <Start> button.
3
Preview the scanned images after the document is scanned.

Color Scanning (Selecting an Output Color)

You can set the output color to scan a document.
Note
1
From the menu displayed by selecting [Color
Scanning], select any option.
 Auto Detect
The color of the document is determined
automatically; the machine scans in full color
when the document is colored, otherwise scans
in monochrome.
Note
 Color
Select this option to scan a color document.
 Black & White
Scans a document in monochrome two tones. You can select the document type in [Original
Type].
Note
• [Color Scanning] is not displayed on the [E-mail] screen depending on the settings in the System
Administration mode. In that case, set [Color Scanning] from the [Advanced Setting] screen.
• When you select [Auto Detect], the available
features on the [Advanced Settings] screen are the same as when you select [Color] in [Color
Scanning] for color documents, or the same as when you select [Black & White] in [Color Scanning]
for monochrome documents.
• [Black & White] is not selectable when [MRC High Compression] is set to [On] on the [File Format]
screen.
E-mail
5
257