Fuji Xerox DocuPrint CM415 AP User Manual page 142

3 Copy
Important • The features selected here cannot be canceled or changed while the machine executes a copy job.
For information on features available in Build Job, refer to "Features that can be set in Build Job" (P.142).
Features that can be set in Build Job
 Copy Output
For more information, refer to "Copy Output (Specifying Finishing Options)" (P.138).
 Booklet Creation
For more information, refer to "Booklet Creation (Creating a Bound Booklet)" (P.123).
 Covers
Important • The machine does not copy on a cover when using the Build Job feature.
For more information, refer to "Covers (Attaching Covers to Copies)" (P.125).
 Annotations
For more information, refer to "Annotations (Adding a Comment/a Date/Page Numbers to Copies)" (P.130).
 Segment Separators
3
For more information, refer to "[Segment Separators] Screen" (P.143).
 Watermark
For more information, refer to "Watermark (Printing Control Numbers on the Background of Copies)" (P.135).
[Copy] Screen When Build Job is in Progress
The following describes the screen that appears
while the Build Job is being executed.
 Chapter Start
Displays the [Build Job - Chapter Start] screen.
Refer to "[Build Job - Chapter Start] Screen" (P.143).
 Insert Separators
Displays the [Segment Separators] screen.
Refer to "[Segment Separators] Screen" (P.143).
 Change Quantity
Displays the [Change Quantity] screen on which you can change the number of copy sets
using the numeric keypad.
 Change Settings
Displays the [Copy] screen on which you can change the settings for the next document.
After changing the settings, press the <Start> button on the control panel to start scanning
of the document. To return to the previous screen, press the < # > button.
When using a stored program for Build Job
While the machine makes copies using the Build Job feature, you can use a stored program.
1) Select [Change Settings].
2) Select the [Job Assembly] tab.
3) Select [Stored Programming].
4) Select the number of the stored program that contains the features you want to use.
For information on how to register a stored program, refer to "Registering Stored Programs for Build Job" (P.343).
142