Output Color (Selecting The Color For Copying) - Fuji Xerox DocuPrint CM415 AP User Manual

3 Copy
 Paper Size
Select from [Standard Size] and [Custom Size].
When you select [Standard Size] or [Custom Size], refer to "When [Standard Size] is Selected" (P.100) or "When [Custom Size]
is Selected" (P.100), respectively.
 Paper Type
Select a paper type.
When [Standard Size] is Selected
Select [Standard Size], and from the lists displayed, select a paper size and then a paper
type.
1
Select a paper size and a paper type.
Note
3
When [Custom Size] is Selected
Enter the width and length of the original document on the fields displayed after selecting
[Custom Size].
Specify the X (width) in the range from 77 to 215 mm, and the Y (length) in the range from
127 to 355 mm in 1 mm increments
1
Enter a paper size using [+] and [-] or the
numeric keypad.
2
Select a paper type.
Note

Output Color (Selecting the Color for Copying)

This feature allows you to select copy colors.
Note
100
• Select [ ] to return to the previous screen or
[ ] to move to the next screen.
• Scroll the list by drag or flick operation to
switch the screen to be displayed. For
information on how to drag or flick, refer to
"Touch Screen" (P.77).
• Select [ ] to return to the previous screen or [
• Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how
to drag or flick, refer to "Touch Screen" (P.77).
• If the use of certain colors is not allowed, the available colors will be restricted. For more information,
refer to "5 Tools" > "Accounting" > "Create/View User Accounts" > "Service Access" in the
Administrator Guide.
] to move to the next screen.