Fuji Xerox DocuPrint CM415 AP User Manual page 118

3 Copy
 Parallel Edges
Erases the shadows of the top and bottom edges, and left and right edges of a document,
as well as the shadow in the center of the document if it is a bound document or a booklet.
You can specify values for [Top & Bottom], [Left & Right], and [Center] individually.
 Erase Value
Allows you to specify values to erase the edges of a document.
 All Edges
Erases the shadows of the four edges of the document according to the orientation of the
loaded document. You can specify the edge width you want to erase in the range from 0
to 50 mm in 1 mm increments.
 Top & Bottom (Top/Bottom)
Erases the shadows of top and bottom edges of the document according to the
orientation of the loaded document. You can specify the edge width you want to erase in
the range from 0 to 50 mm in 1 mm increments.
Left & Right (Left/Right)

Erases the shadows of left and right edges of the document according to the orientation
3
of the loaded document. You can specify the edge width you want to erase in the range
from 0 to 50 mm in 1 mm increments.
 Center
Erases the shadow in the center of facing pages of a bound document or a booklet. You
can set the binding erase width in the range from 0 to 50 mm in 1mm increments.
Important • When you use this feature, please be sure to set the paper size. For more information, refer to
 Original Orientation
Allows you to specify the orientation of the document so that the machine can identify the
top of the document.
Note
Upright Images

Select this option when placing the top edge of the document against the top side of the
document glass or document feeder.
 Sideways Images
Select this option when placing the top edge of the document against the left side of the
document glass or document feeder.
 2 Sided Original - Side 2
You can select this option when [Individual Edges] is selected. Set whether the same value
is set to the edge erase amount of Side 1 and Side 2.
 Same as Side 1
The same value is set to the edge erase amount of Side 1 and Side 2.
 Mirror Side 1
The edge erase amounts of Side 1 and Side 2 are set symmetrically.
118
"Original Orientation (Specifying the Orientation of Loaded Documents)" (P.121).
• If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.