Fuji Xerox DocuPrint CM415 AP User Manual page 22

1 Before Using the Machine
Others
1
22
Always lock the wheels of this product after installation. Otherwise, it may
fall over or slide and cause injuries.
To bundle wires and cables, always use the cable ties and spiral tubes that
Fuji Xerox supplies. Otherwise, it may cause some defects.
To keep this product in a good performance and condition, always use it in
the following environment:
Temperature: 10 - 32°C

 Humidity: 15 - 85%
When the product is left in a chilly room and the room is rapidly warmed up
by heater, dew condensation may form inside the product and cause a
partial deletion on printing.