Fuji Xerox DocuPrint CM415 AP User Manual page 136

3 Copy
2
Select any option.
 Control Number
 Do Not Add
No control number is printed.
Add

A control number is printed. Enter the starting
number of the control number. You can
specify a value in the range from 1 to 999,
using [+] and [-] or the numeric keypad.
 Stored Watermarks
Displays the [Stored Watermarks] screen.
Refer to "[Stored Watermarks] Screen" (P.137).
 User Account Number
Allows you to select whether to print a user account number when the Authentication or
3
Accounting feature is enabled. However, if a user is not authenticated, the account number
will not be printed.
Note
 Date & Time
Allows you to select whether to print the date and time when the copy job started.
For information on the date format, refer to "5 Tools" > "Common Service Settings" > "Watermark" > "Date Format" in the
Administrator Guide.
 Serial Number
Allows you to select whether to print the serial number of the machine.
 Original Orientation
Allows you to specify the orientation of the document so that the machine can identify the
top of the document.
Note
 Upright Images
Select this option when placing the top edge of the document against the top side of the
document glass or document feeder.
 Sideways Images
Select this option when placing the top edge of the document against the left side of the
document glass or document feeder.
 Watermark Effect
Displays the [Watermark Effect] screen.
Refer to "[Watermark Effect] Screen" (P.137).
Note
136
• [User Account Number] is the No. (User Administration Number) registered by users with the
Authentication and Accounting feature.
• You can see if a user is authenticated by checking that the <Log In/Out> button lights up.
• If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.