Fuji Xerox DocuPrint CM415 AP User Manual page 223

4
Use the keyboard displayed on the touch screen to enter numbers in the following format.
Relay station
telephone
number
Note
F Code Method
When using the machine as the initiating station for performing Remote Relay Broadcast,
confirm the F Code and the password (if necessary) for the primary relay station.
Important • When using the F Code method for Remote Relay Broadcast, the primary relay stations and
Note
1
Select the [Fax/Internet Fax Options] tab to
display the [Fax/Internet Fax Options] screen.
2
Select [F Code].
3
Select [On].
4
Select the [F Code] box, and enter the F Code with the numeric keypad.
Note
Relay Broadcast
 Relay Broadcast
The number of digits of the primary relay station ID:
1: When the primary relay station IDs and address numbers are two digits
2: When the primary relay station IDs and address numbers are three digits
Facsimile tone Beep!
• You can specify up to 20 locations for relay recipients.
secondary relay stations must support our F Code method and the Relay Broadcast feature.
• When performing Relay Broadcast with Fuji Xerox manufactured machines that can be used as both
an initiating station and a relay station, we recommend that you use the fax signal method.
• You can enter up to 20 digits for the F Code.
Print Primary
Directive Relay
Station ID
Up to 20 digits
Password
Relay
Address
station
number
ID
Address Address Address
Number Number Number
Broadcast
Beep!
4
....
223