Changing The Ip Address - Buffalo TeraStation TS3400D User Manual

Connection
TeraStation
Jumbo Frame
Jumbo Frame
Compatible Hub
TeraStation
Jumbo Frame
Jumbo Frame
Compatible Hub
TeraStation
Jumbo Frame
Jumbo Frame
Incompatible Hub
TeraStation
Jumbo Frame
Jumbo Frame
Incompatible Hub
Note: Make sure the TeraStation's Ethernet frame size is smaller than the hub or router's. Larger frame sizes may
not transfer the data to the TeraStation correctly.

Changing the IP Address

Normally, the TeraStation's IP address is set automatically from a DHCP server on your network. If you prefer, you can
set it manually. An easy way to do this is to change it from NAS Navigator2 running on a computer connected to the
same router (subnet) as the TeraStation. The procedure to change the IP address in Settings is below.
Note: If the TeraStation is being used as an iSCSI hard drive, to change the settings, navigate to Drives - iSCSI in
Settings and move the iSCSI switch to the
1
In Settings, click Network.
2
Click to the right of "IP Address".
Jumbo Frame
Compatible PC
Jumbo Frame
Incompatible PC
Jumbo Frame
Incompatible PC
Jumbo Frame
Compatible PC
temporarily before changing network settings.
192
Transmission
Transfer data in
jumbo frames.
Transfer data not
using jumbo
frames.
Transfer data not
using jumbo
frames.
Any data cannot be
transferred.