Buffalo TeraStation TS3400D User Manual page 101

These devices are not supported:
• USB hubs
• Mice
• Keyboards
1
In Settings, click Backup.
2
Move the Direct Copy switch to the
3
Connect the USB device. When it mounts (about 10 seconds), the function button will light up.
Note: Devices that don't trigger the function button to light up are not supported.
4
You now have 60 seconds to hold down the function button for 3 seconds. If you do, the function button will
flash as all the files on the USB device are copied to the Direct Copy folder of the TeraStation.
Notes:
• While the function button is flashing, hold it down for 3 seconds to cancel Direct Copy.
For digital cameras that are not in the USB mass storage class, all files from the digital camera are copied.
• To change the Direct Copy target folder, navigate to Backup - Direct Copy - Edit, select a new folder, and click
OK.
5
When the copy operation is finished, the access LED of the USB device will stop flashing. Hold down the
function button for 8 seconds. The function button will flash as all external drives are dismounted, which will
take about 30 seconds. When the dismount is finished, the function button will stop flashing and glow steadily.
You now have 60 seconds to unplug any USB drives safely.
position to enable Direct Copy.
100