Saving Settings - Buffalo TeraStation TS3400D User Manual

Category
Management

Saving Settings

1
Insert a USB memory device into a USB port on the TeraStation.
Notes:
• Use a USB 2.0 port. If your TeraStation has both USB 3.0 and USB 2.0 ports, make sure that you use one of the
USB 2.0 ports.
• The USB memory device should have a capacity of at least 1 GB.
• Any data stored on the USB memory device will be deleted.
2
In Settings, click Management.
3
Click to the right of "Configuration Management".
4
From "Target USB drive", select the USB memory device that is connected to the USB 2.0 port of the
TeraStation.
5
Select "Save current configuration to a USB drive", then click Execute.
6
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
7
When the following message is displayed, saving settings is finished. Click OK.
Settings
All settings in "Name"
All settings in "UPS Sync"
All settings in "SSL"
Display language in Settings
180