Turning The Terastation On And Off - Buffalo TeraStation TS3400D User Manual

13
Boot Mode Switch
Leave the switch in the HDD position during normal operation. To recover settings, insert the recovery USB
drive into a USB 2.0 port, move the boot switch to the USB position, and press the power button.
14
UPS Port
Connect to a UPS.
15
USB 3.0 Port
Compatible Buffalo USB 3.0 hard drives can be connected. USB hubs are not supported.
16
USB 2.0 Port
Compatible Buffalo USB hard drives, USB flash drives, digital cameras, and USB UPS connections can be
connected. USB hubs are not supported.
17
LAN Port 1
Use an Ethernet cable to connect this port to your network.
18
LAN Port 2
This second Ethernet port may be used for network redundancy or backup. You may connect a second
TeraStation directly to this port for backup.
19
Power Connector
Use the included power cable to connect to an UPS, surge protector, or outlet.
20
Fan
Do not block the fan.
21
Anti-Theft Security Slot
Use this slot to secure your TeraStation with a cable lock (not included).
22
UID Button
Press the UID button on the front or the back of the unit to cycle the blue LED on and off.
23
Serial Number
This sticker shows the TeraStation's serial number.
24
Not in use.
25
Link and Act LEDs
These LEDs show network activity. They blink orange when the TeraStation is accessed over the network.

Turning the TeraStation On and Off

Press the power button on the TeraStation to turn it on.
To power off, hold down the power button for 3 seconds (until it beeps). Don't unplug the TeraStation without
turning it off first. You can also shut it down and restart it remotely from Settings.
Shutting Down or Restart from Settings
1
Double-click the icon to start NAS Navigator2.
10