Buffalo TeraStation TS3400D User Manual page 71

4
Enable access restrictions, enter a username and password, and click OK.
Note: To enable mutual authentication, check "Enable Mutual Authentication" in the screen above and enter the
mutual authentication password.
5
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
6
Click OK, then Close.
Configuring access restrictions for each iSCSI volume is finished.
Connecting to Individual Volumes that are Access-Restricted
Using Microsoft iSCSI Initiator
1
Open the Microsoft iSCSI Initiator.
2
Register the mutual authentication password to your computer first. If you didn't enable the mutual
authentication, skip this step.
Click CHAP in the "Configuration" tab. In the "Initiator CHAP secret" field, enter the configured mutual
authentication password and click OK.
3
In the "Discovery" tab, click Discover Portal.
4
Enter the TeraStation's IP address in the "IP address or DNS name" field.
5
Click Advanced.
6
Check "Enable CHAP log on" and enter the configured username to the "Name" field and password into the
"Target secret" field.
If the mutual authentication is enabled, check "Perform mutual authentication".
70