Buffalo TeraStation TS3400D User Manual page 35

4
Select "Workgroup" and click Next.
5
If a prompt appears, click Yes.
6
Enter a workgroup name. Select "Authenticate local and external SMB server users" and enter the SMB server's
IP address. You can also specify a server from another subnet.
7
If "Automatically register users who access TeraStation folders" is checked, users that access any of the
TeraStation's folders will be automatically registered as external users. This process only applies with folders
that have access restrictions disabled. After new external users are added, disable this option to limit the
number of authenticated user accounts.
8
If "Restrict user registration to a single folder" is checked, the TeraStation will automatically create a read-
only shared folder. Enter the shared folder name. Users that access this specific folder will be automatically
registered as external users. If this setting is de-selected at a later time, the TeraStation will automatically
remove the folder.
Note: Connect to the authentication folder via SMB, not FTP or AFP. Automatic user registration may not work
with OS X 10.8 (or later) the first time. If this occurs, try rebooting the TeraStation then access the authentication
shared folder again.
9
Click OK to save any changes. When saving changes to the external authentication server settings, you may
not to convert all current local users to external users. If a local user is converted to an external user, their user
information (including passwords) will be removed from the NAS. External users cannot be reverted to local
users.
34