Menu; Novabackup; Installing From Cd; Installing From Website - Buffalo TeraStation TS3400D User Manual

Name
Connect on Start Up
Refresh
Exit

Menu

Name
Refresh
File
Exit
Configuration
Change IP address
Unregister iSCSI
device
Set mutual CHAP
Setup
secret
Persistent Volume
Connect volumes
Disconnect volumes
Disk management
Help About

NovaBACKUP

NovaBACKUP is a Windows utility that lets you back up the data on your computer or TeraStations.

Installing from CD

The installation methods are different depending on which version of TeraNavigator CD you have. If your
TeraNavigator CD is version 1.11 or earlier, install NovaBACKUP from the included TeraNavigator CD.
1
Insert the TeraNavigator CD to your computer.
2
Launch TSNavi.exe from the TeraNavigator CD.
3
Click Options - Additional Software Installation.
4
Select "NovaBACKUP" and click Install. Follow the procedure to finish installing NovaBACKUP.

Installing from Website

If your TeraNavigator CD is version 1.20 or later, install the software from http://buffalo.jp/support_s/guide2/
manual/ts/3000/en/manual.html. Select the region and model to go to the d.buffalo site of your specific product
model.
To download the installer, you will need the serial number of your TeraStation. The serial number is printed on the
label on the back of the unit.
Description
If selected, the computer will connect to the volume automatically at
boot.
Searches for network devices on the LAN.
Exits iSCSI Connection Tool.
Description
Searches for network devices on the LAN.
Closes the iSCSI Connection Tool.
Opens Settings for the selected TeraStation.
You can change the IP address of the selected TeraStation.
If you disconnect the TeraStation without unregistering it or changing
its IP address, the registration information stays in your computer
and searches will take longer. For better performance, unregister
disconnected TeraStations with this command.
Sets the CHAP password on the computer side.
If checked, your computer will reconnect to the TeraStation whenever
it's restarted.
Connects multiple volume at a time.
Displays the screen to disconnect multiple volume at a time.
Formats drives.
Displays version information.
203