3
In the "Discovery" tab, click Discover Portal.
4
Enter the TeraStation's IP address in the "IP address or DNS name" field.
5
Click Advanced.
6
Check "Enable CHAP log on" and enter the configured username to the "Name" field and password into the
"Target secret" field.
If the mutual authentication is enabled, check "Perform mutual authentication".
7
Click OK twice.
8
In the "Targets" tab, select the volume from "Discovered targets" and click Connect - OK.
9
If the status of the selected volume is displayed as "Connected" under "Discovered targets", the connection is
established properly.
Accessing the volume on the access-restricted TeraStation is finished.
Using iSCSI Connection Tool
1
Open iSCSI Connection Tool.
2
Select the TeraStation name from the drop-down menu of "Target" and click Register iSCSI Device.
67